INVERTER TECHNOLOGY Easy to install Friedrich ductless split systems have the advantages of a ducted installation without the high material and labor costs. Absolutely no ductwork is required, so most systems can be installed and running in a few hours.
Learn more about ductless visit www.friedrich.com to see an online video that explains the advantages of Friedrich ductless split systems Residential applications • Room additions/renovations • Homes without ductwork • Bedrooms and family rooms •...
Page 4
35200 M36QYF 9500 9500 9500 9500 38000 Precise comfort from one system in up to four different rooms. That’s the beauty– and efficiency of a Friedrich Multi-zone system. INVERTER TECHNOLOGY 16.5 16.5 16.5 15.0 15.0 15.0 15.0 = cooling capacity 15.0...
Page 5
Floor/ceiling universal heat pump Universal system may be located low against the wall or on the ceiling. Features • Auto swing louvers (up/down, left/right) • Continuous ‘Air Sweep’ • Auto-restart after power interruptions • Auto-shut flaps close when unit is off for a sleeker appearance •...
Page 6
R410A R410A INVERTER INVERTER Flare Flare Flare 39 1/4 x 12 5/8 x 9 39 1/4 x 12 5/8 x 9 35 3/8 x 32 5/8 x 13 M09YG M12YG MW09Y3G MW12Y3G MR09Y3G MR12Y3G 8500 11500 3100-13300 0.71 0.71 10000...
Page 7
Dual-zone heat pumps PerFOrMAnce rAtInGs SYSTEM MODEL NO. M18DYF INDOOR MODEL 2 x MW09Y3FM OUTDOOR MODEL MR24DY3F Capacity Cooling BTU/h 9500 ea. Capacity Cooling Min - Max BTU/h 5100-11300 Sensible Heat Ratio 0.77 Capacity Heating @ 47°F BTU/h 11000 ea. Capacity Heating Min - Max BTU/h 5100-13000 ea.
S36YF and C24YF Units Insulated line sets are available for all Friedrich split systems in 15 ft. and 35 ft. lengths. Each line set is equipped with flare nuts on both ends. Both liquid and suction lines are insulated. Line sets can be joined together with field supplied double female connectors. Each system requires one line set for each indoor unit installed.