Solving Problems; Fax Error Messages; Sending And Receiving - Epson AcuLaser CX11NF Fax Manual

Solving Problems

This chapter describes ways for you to solve any problems that might occur with the
fax functions.

Fax Error Messages

Message
Fax Error
Insufficient memory Wait until the fax jobs stored in memory are finished, then try
Send failed

Sending and Receiving

Problem
Document stops
feeding during faxing
Action
Turn off the product, wait several minutes, then turn it on again. If the
error occurs again, contact Epson as described on page 54.
transmission/reception again, or a lower Image Quality setting.
This message appears when you send a fax manually or when a color
fax transmission fails. Try sending a fax using the memory
transmission function.
Solution
• The maximum length of a page you can load is 14 in. Faxing a
longer page stops at 14 in. The maximum page size for the Auto
Document Feeder is 8.5 × 14 in. If the item is too small, it can jam
inside the Auto Document Feeder.
• There might be problems with the fax machine you are sending
to. Try contacting the recipient by phone.
• There might be problems with the phone line.
Turn up the volume on the unit and press the
Color Start button on the control panel. If you hear a dial tone,
x
the phone line is working. To change the speaker volume, see
"Basic Settings" on page 40.
Disconnect the product from the phone jack and connect a phone.
Try to make a phone call to make sure the phone line is working.
7
x B&W Start or
Solving Problems
51