Table of Contents
Advertisement
24
Care & Cleaning
IMPORTANT
DO NOT load garments or other items in the
washer when cleaning the inside of the washer.
TO REFRESH WASH DRUM
Perform the SYSTEM CLEAN cycle to refresh the
wash drum follow these steps:
1.
Wake up the washer by pressing any button, ro-
tate cycle knob to the hand wash cycle, press
the start button and then the cancel button.
2.
Wake up the washer again by pressing any but-
ton, then immediately and simultaneously press
and hold both the eco friendly and control
lock buttons for 5 seconds, or until the LCD
display changes.
3.
Remove all clothing from the drum, add 1 cup
liquid chlorine bleach to the empty wash drum,
and press start.
This maintenance cycle uses hot water and two
rinses to remove residue that may cause odor.
NOTE
The washer will automatically prompt you to
run the SYSTEM CLEAN cycle every 50 cycles.
You may press the cancel button to manually
perform the cycle at another time.
OTHER INSIDE CLEANING
•
Before cleaning the washer interior, unplug the
electrical power cord to avoid electrical shock
hazards.
•
Dry around the washer door opening, flexible
gasket, and door glass. These areas should
always be clean to ensure a water tight seal.
•
When extremely soiled items have been
washed, a dirty residue may remain on the
drum. Remove this by wiping the drum with a
nonabrasive household cleanser. Rinse thor-
oughly with water.
•
Periodically, wipe dry the folds in the bottom
of the flexible gasket to remove lint and other
debris.
•
The drum vanes may become stained from fab-
ric dye. Clean these parts with a nonabrasive
household cleanser to prevent dye transfer to
future loads.
Hide quick links:
Advertisement
Table of Contents
