Table of Contents
Advertisement
CAUTION
To avoid injury from breakage, handle
tempered glass shelves carefully.
NOTE
Features may vary according to model.
You can easily adjust shelf positions in the freezer
and fresh food compartments to suit your needs.
The shelves have mounting brackets which
attach to slotted supports at the rear of each
compartment.
To change the position of a shelf:
1 Before adjusting a shelf, remove all food.
2 Lift the front edge up.
3 Pull the shelf out.
4 Replace by inserting the mounting bracket
hooks into the desired support slots.
5 Lower the shelf and lock into position.
1
Loosen Spacers
to Stabilize Shelf
Against Liner
Tighten Spacers
to Remove Shelf
1
2
3
Storage Features
NOTE
The Cantilever Sliding Glass Shelf has spacers
(side screws) on the sides of the brackets to
securely hold the shelf in place.
To relocate the shelf to a different location, the
spacers must be turned in (clockwise). To secure
the shelf in a new location, remember to turn the
spacers out (counterclockwise) until they touch
the sides of the compartment.
Shelf features
Your refrigerator includes SpillSafe
which are designed to catch and hold accidental
spills. These shelves slide out for easy access to
food and faster cleaning.
Sliding shelves can be pulled forward as far as
their built-in stops allow. Sliding shelves cannot be
separated from their mounting brackets.
Drawers
Your refrigerator includes a variety of storage
drawers. These drawers usually are located in
fixed positions at the bottom of the fresh food
compartment.
Crispers
Crisper drawers are designed for storing fruits,
vegetables, and other fresh produce. Before storing
items in a crisper:
• wash items in clear water and remove
excess water.
• wrap any items that have strong odors or
high moisture content.
NOTE
Leafy vegetables keep best when stored with
the Humidity Control set on Higher Humidity,
or in a drawer without a Humidity Control. This
keeps incoming air to a minimum and maintains
maximum moisture content.
15
glass shelves,
TM
Advertisement
Table of Contents
