Set Alarm Timer; Set Sleep Timer - Philips AJ3200/79 User Manual

Set alarm timer

You can set two alarms to ring at different time.
Note
•
You can only set the alarm in standby mode.
•
Make sure that you have set the clock correctly.
1
Press and hold AL1 or AL2 for two
seconds to activate alarm setting mode.
» The hour and minute digits blink.
2
Press HR repeatedly to set the hour.
3
Press MIN repeatedly to set the minute.
4
Press AL1 or AL2 to confirm.
Tip
•
The clock radio exits alarm setting mode when being
idle for 10 seconds.
Activate or deactivate the alarm timer
Press AL1 or AL2 repeatedly to activate or
deactivate the alarm timer.
» If the alarm timer is activated, the
alarm indicator for FM tuner or buzzer
is displayed.
» If the alarm timer is deactivated, the
alarm indicator disappears.
• To stop the ringing alarm, press the
corresponding AL1/AL2.
» The alarm repeats ringing for the next
day.
Note
•
If FM tuner is selected and you are listening to
radio when alarm time comes, buzzer is activated
automatically.
•
If buzzer is selected as alarm source, the alarm volume
remains at a default level.
•
If FM tuner is selected as alarm source, the alarm
volume increases gradually and cannot be adjusted.
EN
8
Alarm source
AC power
FM tuner/Buzzer
Snooze the alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing
nine minutes later.

Set sleep timer

1
Turn on the product..
2
Press SLEEP repeatedly to select a period
(in minutes).
» The clock radio switches to standby
mode automatically after the preset
period.
To deactivate the sleep timer:
Press SLEEP repeatedly until [OFF]
•
(off) appears.
120 90 60
OFF
Alarm
duration
30 minutes
30 15