Hot-Key Menu; Osd Message - Acer AL1716 Service Manual

OSD Message

a. Outline
b. The Description For OSD Message
Item
Auto Config When Analog signal input, if User Press Hot-Key "Auto", will show
Please Wait This message, and the monitor do the auto config function.
When the Hsync Frequency, Vsync Frequency or Resolution is out of
Input Not
Supported
Cable Not Analog-Only Model: When the video cable is not connected, will show
Connected This message. This message will be flying.
Analog-Only Model: When the video cable is connected, but there is
No Signal
No active signal input, will show this message, then enter power saving.
The monitor support range will show this message. This message will
Be flying.
Description
23