VT 5800 Disassembly Procedure
This section tells you how to disassemble the system when you need to perform system service. Please also
refer to the disassembly video, if available.
CAUTION: Before you proceed, make sure you have turned off the system and all peripherals connected to it.
Opening the System
1.
Place the system unit on a flat, steady surface.
2.
Turn the housing back, and remove the screws as shown here.
3.
Slide the top cover out. Please also remove the front bezel.
4.
Remove the screw shown here, and remove the top bracket.
Removing the VGA Card
1.
Release the PCI lock then remove it.
2.
Release the Rubber-Lock and pull out the VGA card.
Chapter 3
57