Parameter
Primary/Secondary IDE
FDD, COM, LPT Port
PCI PIRQ[A-D]#
34
Description
When this item is enabled, the system power will
resume the system from a power saving mode if
there is any activity on primary or secondary IDE
channels 0 or 1.
When this item is enabled, the system will restart
the power-saving timeout counters when any
activity is detected on the floppy disk drive, serial
ports, or the parallel port.
When this item is enabled, any activity from one
of the listed devices wakes up the system.
Options
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Chapter 2