Specifications; Specific Safety Rules - Makita 4351TJ Instruction Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ENGLISH
(Original instructions)
1
Cutting action changing lever
2
Switch lever
3
Speed adjusting dial
4
Tool opener
5
Blade clamp
6
Jig saw blade
7
Protrusions
8
Base
9
Hex wrench
10 Cutting line

SPECIFICATIONS

Model
Length of stroke............................................................. 26 mm
Max. cutting capacities
Wood .......................................................................... 135 mm
Steel ........................................................................... 10 mm
Aluminum ................................................................... 20 mm
Strokes per minute (min
Overall length ................................................................ 271 mm
Net weight ..................................................................... 2.5 kg
Safety class ...................................................................
• Due to our continuing programme of research and
development, the specifications herein are subject to
change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply.
They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
6
Explanation of general view
11 Bolt
12 Graduation
13 Bevel slot
14 Gear housing
15 V-notch
16 Starting hole
17 Dust nozzle
18 Hose for vacuum cleaner
19 Rip fence
20 Fence guide
–1
) ........................................... 2,800
4351T
/II

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adher-
ence to jig saw safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious
personal injury.
1.
Hold power tools by insulated gripping sur-
faces when performing an operation where
the cutting accessory may contact hidden
wiring or its own cord.
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
2.
Use clamps or another practical way to
secure and support the workpiece to a stable
platform.
body leaves it unstable and may lead to loss of con-
GEA010-1
trol.
3.
Always use safety glasses or goggles. Ordi-
nary eye or sun glasses are NOT safety
glasses.
4.
Avoid cutting nails. Inspect workpiece for any
nails and remove them before operation.
5.
Do not cut oversize workpiece.
6.
Check for the proper clearance beyond the
workpiece before cutting so that the blade
will not strike the floor, workbench, etc.
7.
Hold the tool firmly.
8.
Make sure the blade is not contacting the
workpiece before the switch is turned on.
9.
Keep hands away from moving parts.
10. Do not leave the tool running. Operate the
tool only when hand-held.
21 Threaded knob
22 Circular guide pin
23 Rule bar
24 Screw
25 Guide rail adapter
26 Guide rail
27 Cover plate
28 Anti-splintering device
4351CT
4351FCT
26 mm
26 mm
135 mm
135 mm
10 mm
10 mm
20 mm
20 mm
800 – 2,800
800 – 2,800
271 mm
271 mm
2.5 kg
2.5 kg
/II
/II
Cutting accessory con-
Holding the work by hand or against your
GEB016-2

Advertisement

Table of Contents
loading

This manual is also suitable for:

4351ct4351fct4351t4351fctj

Table of Contents