Ryobi RDG18C Manual page 6

Speed, minimum
Speed, maximum
Stop the product.
ACCESSORY
Accessory description
2 in. Twist and Lock Paint Prep Disc
2 in. Flap Wheel
2 in. Twist and Lock Sanding Disc
2 in. Twist and Lock Surface Conditioning Disc
2 in. Twist and Lock Bristle Disc
2 in. Cut Off Wheel
1 in. Carbide Burrs
Grinding and Polishing Stones
* Always follow the recommended speed settings from the accessory manufacturer
BALANCING ACCESSORIES
For precision work, ensure that all accessories are properly balanced. To balance an accessory, loosen the collet nut and
turn the accessory or collet by ¼ inch. Adjust the accessory until it is balanced. Check if the accessory operates properly
before operating the product. If the accessory is damaged or cannot be balanced, replace it with a new one.
6
Original Instructions
Application
Paint removal
Rust removal, sanding wood, polishing
metal
Rust removal, sanding welds, surface
prep
Rust removal, sanding welds, surface
prep
Rust removal, surface prep
Cutting metal brackets, clamps, nails,
bolts, tubing
Shaping and deburring metal
Honing and smoothing metal or wood
Recommended speed *
Mode 1: 10,000 RPM
Mode 2: 15,000 RPM
Mode 3: 20,000 RPM
Mode 3: 20,000 RPM
Mode 3: 20,000 RPM
Mode 3: 20,000 RPM
Mode 3: 20,000 RPM
Mode 4: 22,000 RPM
Mode 3: 20,000 RPM
Mode 4: 22,000 RPM