Asus PRIME B360-PLUS Manual page 12

M.2 socket 3
These sockets allow you to install M.2 (NGFF) SSD modules.
• These sockets support M Key and type 2242/2260/2280 storage devices.
• Only the M.2_2 socket can support Intel
• The M.2_1 socket supports data transfer speed up to 16Gb/s.
• The M.2_2 socket supports data transfer speed up to 32Gb/s.
• Only the M.2_1 socket can support SATA mode storage devices. When a device in
SATA mode is installed on the M.2_1 socket, SATA_2 is disabled.
Intel B360 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~6)
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA
6.0 Gb/s signal cables.
Clear RTC RAM (2-pin CLRTC)
This header allows you to clear the CMOS RTC RAM data of
the system setup information such as date, time, and system
passwords.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Use a metal object such as a screwdriver to short the two
pins.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and
enter BIOS setup to re-enter data.
If the steps above do not help, remove the onboard battery and short the two pins again
to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
1-3
PRIME Z270-P
PRIME Z270-P M.2(SOCKET3)s
Optane™ memory.
®
ASUS PRIME B360-PLUS
M.2_1(SOCKET3)
2280 2260 2242
M.2_2(SOCKET3)
2280 2260 2242
CLRTC
PIN 1