Table of Contents
Advertisement
Playing a Demo Tune
Pressing the DEMO button starts demo tune play, which
plays the 100 built-in tunes in sequence. To stop demo tune
play, press the DEMO, START/STOP, or STOP button.
NOTES
• Pressing [+] (forward) or [–] (back) skips to the next demo tune.
• You can change the tone setting of the keyboard (page E-14)
before starting demo play, and then use that tone to play along
on the keyboard.
• MIDI, Layer, and Split are disabled while a demo tune is play-
ing.
About the display
n
list
2.
This area shows tone number and name, rhythm number
and name, and tune number and name. It also shows
other information when using the memory function and
other functions. Indicators also appear here to show what
kind of data is displayed: TONE (tone data), RHYTHM
(rhythm data), SONG BANK (Song Bank data).
1.
A dot and piano mark appears next to
the group that is in use: Etude,
Concert Piece.
8.
Uses a graphic
keyboard to show
notes being
played from built-
in tunes, on the
keyboard, or from
memory, chord
forms, and MIDI
receive data.
7.
This area shows chord names during Auto Accompaniment and
Song Bank play.
6.
This area shows measure number, beat number, a graphic metronome, and tempo
value (beats per minute) during rhythm and Auto Accompaniment play, and when
using memory. It also shows the step number when using the 3-step lesson.
NOTE
Display examples shown in this User's Guide are intended for illustrative purposes only. The actual text and values that appear on the display may differ from
the examples shown in this User's Guide.
702A-E-011A
•
For input of
numbers to change
Number
a displayed
buttons
number or setting.
•
Negative values
cannot be input
using the number
[+]/[–]
buttons. Use [+]
(increase) and [–]
buttons
(decrease) instead.
ETUDE
CONCERT
PIECE
Rear Panel
MIDI IN terminal
OUT
IN
MIDI
MIDI OUT terminal
ASSIGNABLE JACK terminal
SPLIT button
3.
This area is a staff notation display that shows notes being played
from built-in tunes, on the keyboard, or from memory, chord forms,
1
and MIDI receive data.*
Notes in the range F
the staff notation display one octave lower, along with an octave up
2
mark (
).*
If you are using a pedal, a pedal mark (
whenever you press the pedal.
*1 Received notes outside the range of C2 to C7 do not appear on
the display.
*2 Notes in the range of C2 through B2 are not shown while the
octave up mark (
) is on the display.
LAYER
SPLIT
GM
TOUCH
RESPONSE
MEMORY
5.
This area shows fingerings, dynamic
marks, and other finger information
during 3-step lesson and tune play. The
letters "L" (left) and "R" (right) appear to
indicate left and right hand Auto
Accompaniment parts and memory
tracks.
PHONES/OUTPUT terminal
ASSIGNABLE
PHONES/
DC 9V
JACK
OUTPUT
DC 9V jack
TONE button
RHYTHM button
SONG BANK button
LAYER button
#
6 to C7 are shown in
) appears here
4.
A pointer or
indicator appears
next to a function
that is in use:
touch response,
General MIDI
Mode, layer, split,
memory, step.
E-9
Hide quick links:
Advertisement
Table of Contents
