Table of Contents
Advertisement
Assembly Manual
5. Transport and storage
The product has to be transported carefully to prevent any damage that could impair its function.
The product is designed for indoor applications. Permanent storage in liquids, e.g. water, has to be
avoided.
6. Maintenance and care
The loudspeaker accessory may show signs of wear over time, e.g. due to mechanical stress, corrosion
or improper handling. In case of fixed installation, the mount must therefore be checked for signs of
wear and secure fit at regular intervals.
During the checks, particular attention has to be paid to deformations, cracks, notches, damage to
threads and corrosion. Mounting and fastening materials such as screws must also be thoroughly
checked for wear and deformation.
If the check reveals uncertainties or damaged parts, the loudspeaker/the mount may no longer
be used. Operators/users must inform themselves about nationally applicable, comprehensive test
regulations and also apply them.
7. Technical data
7.1. VESA Loudspeaker Mount | VSM (55''-65'')
MECHANICAL PROPERTIES
Material:
Load capacity:
Standard colour:
Supported display sizes:
Supported VESA hole patterns:
Category: 55''
Category: 65''
Weight per wall mount:
TECHNICAL DRAWING: VESA LOUDSPEAKER MOUNT | VSM (55''-65'')
© Pan Acoustics GmbH
Steel
max. 8 kg per speaker
RAL 9005, powder-coated
55'', 65''
VESA H: 200/300/400
VESA V: 200/300/400
VESA H: 300/400/600
VESA V: 200/300/400
8 kg
Page 12 of 14
Advertisement
Table of Contents
