Table of Contents
Advertisement
Rack-Mount Installation
MatrixPRO 12x units are designed to be rack mounted and the necessary hardware is supplied. When rack mounting
the unit, remember that maximum ambient operating temperature for the unit is 40 degrees C. Leave at least one
inch of space front and rear to make sure that the airflow through the fan and vent holes is not restricted. When
installing equipment into a rack, distribute the units evenly to prevent hazardous conditions that may be created by
uneven weight distribution. Connect the unit only to a properly rated supply circuit. Reliable Grounding (Earthing) of
Rack-Mounted Equipment should be maintained.
Power Cord/Line Voltage Selection
The MatrixPRO 12x Matrix Switcher performs line Voltage Selection automatically. No user controls are required for
line voltage selection.
When the MatrixPRO 12x is used in the 230-volt mode, a UL listed line cord rated for 250 volts
WARNING
at 15 amps must be used. This cord will be fitted with a tandem prong-type plug.
AVERTISSEMENT
Das MatrixPRO 12x-Gerät mu beim Anschlu an 240V ~ mit einer vom VDE auf 250V/10A geprüften
WARNUNG
Netzleitung mit einem Schukostecker ausgestattet sein.
Manual # 26-0301000-00 / Revision C
Tandem Plug
La choix de la ligne de voltage se réalise automatiquement par le MatrixPRO 12x
Transformateur Graphique. On n'a pas besoin du controller usager pour la choix de la ligne
de voltage.
MatrixPRO 12x - 12 Input Matrix Switcher
7
Advertisement
Table of Contents
