Table of Contents
Advertisement
Technical Description
MatrixPRO 12x is an RGBHV matrix switcher with 375MHz video bandwidth. It's available with 12 inputs and either 4
or 8 outputs. Output gain is unity into 75 ohm loads. All video signals are carried on BNC's for the highest signal
quality. Audio routing card is available as an option.
The matrix switcher can route any input to any output or outputs, and it has built in capabilities to group outputs
and/or inputs with specific outputs.
The analog video section maintains flat response in the critical 0-10MHz band to prevent video smearing. The analog
video section has excellent crosstalk immunity, offset pass though, and output drive capabilities. The system can
pass 2048x1536 signals with minimal degradation. The analog video section can pass RGB, RsGsBs, RGsB,
component, composite, and S-video with significant input offset.
The horizontal and vertical sync sections reconstructs the sync signal to provide the most accurate output sync
signals.
The audio section accepts and outputs both balanced and unbalanced audio signal on five position Phoenix quick
disconnect screw terminals. A 600 ohm resistor must be placed across the inputs if a 600 ohm characteristic
impedance is required.
The MatrixPRO 12x series can be controlled by the front panel, RS-232, RS-485, or Ethernet. The MP Control GUI
allows the matrix switcher via RS-232 and Ethernet interfaces.
For remote push button operation, Folsom Research offers the MP Remote Control Panel. Please inquire the factory
for more information.
3
Manual # 26-0301000-00 / Revision C
MatrixPRO 12x - 12 Input Matrix Switcher
Advertisement
Table of Contents
