Heinner HCM-D915BKS Manual page 16

www.heinner.com 220-240V~50-60Hz, 900W
DELAY FUNCTION
If you do not want the coffee maker to start operation immediately, for example now it is 8:10, you
hope that the coffee maker will automatically start working at 13:00, first follow steps 1 to 5 of
above section, and then you can set the automatic start function as follows:
1. Press PROGRAM button one time, set the current time by pressing HOUR and MINUTE button
repetitively that is 8:10.
Note: The time cycle is 24 hours.
2. Press PROGRAM button one time, the indicator of ON/OFF button will illuminates in green and
flash. (Means the coffee make enter the presetting time state.)
3. Set the delayed starting time by pressing HOUR and MINUTE button repetitively that is 13:00.
4. Press the DELAY BREW button, the indicator of ON/OFF button is illuminated in green. After a
while, the LCD will display the current clock. You may see the automatic start time by pressing
DELAY BREW.
Note: You may cancel the automatic start function by pressing ON/OFF. If you want to change the
automatic start time, only following the above 2-4 steps again.
5. When the time is due, the indicator of ON/OFF button will illuminate in red and the appliance
starts brewing.
6. When the process is finished, if you do not want to serve immediately, keep the coffee maker is
energized, the coffee can be kept warm in the warming plate. And the appliance will shut off
automatically after 40 minutes from the ON/OFF button being activated if it has not been manually
disconnected at the completion of brewing. For an optimum coffee taste, serve it just after
brewing.
Note: During brewing process, the buttons of "PROGRAM", "DELAY BREW", and "HOUR" and
"MINUTE" are invalid.