Related Manuals for Pulsar HPSB 7012E
Summary of Contents for Pulsar HPSB 7012E
- Page 1 HPSB 7012E v.1.0 HPSB 13,8V/6A/65Ah Buffer, switching power supply unit. Edition: 4 from 12.11.2013 Supercedes: 3 from 16.09.2013...
- Page 2 HPSB7012E Features: DC 13,8V/6A uninterruptible power supply battery output full protection against short- circuit and reverse polarity connection fitting battery: 65Ah/12V wide range of mains supply: 176÷264V LED indication protections: high efficiency 80% ...
- Page 3 HPSB7012E 7. Buffer power supply unit HPSB 13,8V/3x5V÷7,4V/3x2A/65Ah. - HPSB7012E + 3xDCDC20 (3x5V÷7,4V/3x2A) + 65Ah 8. Buffer power supply unit HPSB 13,8V/3x5V÷7,4V/6x1A/65Ah. - HPSB7012E + 3xDCDC20 (3x5V÷7,4V/3x2A)+3xLB2 6x1A (AWZ585 or AWZ586) + 65Ah 1.2 Block diagram (fig.1) Fig.1. The block diagram of the PSU.
- Page 4 HPSB7012E Fig.2. The view of the PSU.
- Page 5 HPSB7012E 1.4 Specifications: - electrical parameters (tab.3) - mechanical parameters (tab.4) - operation safety (tab.5) - operating parameters (tab.6) Electrical parameters (tab. 3). PSU type A (EPS - External Power Source) Mains supply 176÷264V AC Current up to 0.95A@230VAC Power frequency 50÷60Hz or DC...
- Page 6 HPSB7012E Operating parameters (tab.6). Operating temperature -10ºC...+40ºC (see: chart 1) Storage temperature -20ºC...+60ºC Relative humidity 20%...90%, without condensation Vibrations during operation unacceptable Impulse waves during operation unacceptable Direct insulation unacceptable Vibrations and impulse waves during transport According to PN-83/T-42106 Chart 1.
- Page 7 HPSB7012E The shock protection circuit shall be performed with a particular care, i.e. the yellow and green wire coat of the power cable shall stick to one side of the terminal - marked with ‘ ‘ symbol on the PSU enclosure. Operation of the PSU without the properly made and fully operational shock protection circuit is UNACCEPTABLE! It can cause a device failure or an electric shock.
- Page 8 GENERAL WARRANTY CONDITIONS 1. Pulsar K. Bogusz Sp.j. (the manufacturer) grants a two-years warranty for the equipment, counted from the device’s production date. 2. The warranty includes free-of-charge repair or replacement with an appropriate equivalent (the selection is at the manufacturer’s discretion) if the malfunction is due to the manufacturer, includes manufacturing or material defects,...
Need help?
Do you have a question about the HPSB 7012E and is the answer not in the manual?
Questions and answers