Table of Contents
Advertisement
Preparation
2
Mounting the TV to a Wall
Remove the stand assembly before mounting the TV onto the wall.
1. Remove the 3 screws from each foot to remove the feet.
2. This TV is designed to be wall-mounted with
a standard 200 mm x 200 mm mounting kit
(sold separately) designed for flat-panel TVs.
Mount this TV according to the instructions
included in the mounting kit. Due to space
restrictions, we recommend that you make all
connections before mounting on to
the wall.
• If you are wall mounting your TV you may wish to buy a 90° HDMI adapter. This will help with your cable management.
• Please read this instruction manual carefully while setting up your TV.
• If you require additional assistance please call our Call Centre on (UK) 0344 561 1234 or (Ireland) 1 890 818 575.
Our Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.
Front / Right Side View and Controls
VGA
LAN
Optic.OUT
Item
1
POWER LED
2
IR (Infrared Receiver)
3
FUNCTION BUTTONS
12
LT-40C860_IB.indd 12
SubW.OUT
Pr
R
Pb
L
Y / Video
USB
5V DC max 500mA
ANT.
HDMI 1
1
2
Description
Illuminates when the TV is in standby mode. The LED will blink confirming that a timer
recording programme has started in the standby mode.
Receives IR signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
Press and Hold to switch the TV into standby. Press to view the Source menu. Press +/-
to adjust the volume. Press
200mm
200mm
Four mounting holes
(size M6 screw)
USB 3.0
USB
3
ARC
/
to change channels.
24/04/2017 12:17
Advertisement
Table of Contents
