Front panel controls
Minus / Plus
Turns the monitor on/off. White indicates power on.
Amber indicates standby/power saving mode.
If the OSD is active, press the Minus or Plus buttons
to toggle between the OSD options.
Press to view the OSD. Press again to enter a
selection in the OSD. Please refer to "Adjusting the
OSD settings" on page 11 for more details.
If the OSD is active, press Auto to exit the OSD.
Once the OSD is inactive, press Auto and the
monitor will automatically optimize the display
position, focus, and clock of your display.
Press the Empowering Key to open the Acer eColor
Management OSD and access the scenario modes.
Please refer to "Acer eColor Management" on page
10 for more details.
Use Input key to select between three different video
source that may be connected to your
(a) VGA input (b) DVI-D input (c) HDMI input
As you cycle through the inputs you will see the
following messages on right top side of screen to
selected input source. It may take
1 or 2 seconds for the image to appear .
VGA or DVI-D or HDMI
If either VGA or DVI-D input is selec ed and both
A and DVI-D cables are not connected, a floating
dialog box as
shown below appears:
No Cable Connect or No S ignal