Registering Pin Code; Selecting The Bluetooth Device You Wish To - Kenwood KDC-BT61U Instruction Manual

Function of KDC-BT61U
KDC-6051U with KCA-BT300/ KCA-BT200 (Optional Accessory)
Bluetooth Setup

Registering PIN Code

By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1
Enter Bluetooth mode
KDC-BT61U
Press the [ ] button.
KDC-6051U
Press the [TI] button for at least 1 second.
✍ You can also select from "Settings" in Menu List
mode.
2
Enter PIN code edit mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "BT Settings" >
Code Edit".
The current setting of PIN code is displayed.
3
Input the PIN code
Operation type Operation
Select the numbers. Turn the [VOL] knob.
Move to the next digit. Press the [¢] button.
Delete the last digit. Press the [4] button.
4
Register a PIN code
Press the [VOL] knob for at least 1 second.
If "Completed" is displayed, registration is
completed.
5
Exit BT Settings mode
KDC-BT61U
Press the [ ] button.
KDC-6051U
Press the [TI] button for at least 1 second.
⁄
• By default, "0000" is specified.
• A PIN code can be specified with up to eight digits.
48
|
KDC-BT61U/ KDC-6051U
"Detailed Setup" > "PIN
Selecting the Bluetooth device You
Wish to Connect
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1
Enter Bluetooth mode
KDC-BT61U
Press the [ ] button.
KDC-6051U
Press the [TI] button for at least 1 second.
✍ You can also select from "Settings" in Menu List
mode.
2
Select Bluetooth device selection mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Cell-phone
Select "BT Settings" >
Audio player (KDC-6051U only)
>
Select "BT Settings"
3
Enter Bluetooth device selection mode
Press the [VOL] knob for at least 1 second.
"(name)" is displayed.
4
Select the Bluetooth device
Turn the [VOL] knob.
5
Set up the Bluetooth device
Press the [4] or [¢] button.
"✱(name)" or "-(name)" is displayed.
"✱": T he selected Bluetooth device is busy.
"-": T he selected Bluetooth device is on standby.
" " (blank): T he Bluetooth device is deselected.
6
Exit BT Settings mode
KDC-BT61U
Press the [ ] button.
KDC-6051U
Press the [TI] button for at least 1 second.
⁄
• If a Bluetooth device is already selected, deselect it, and
then select a different one.
• If you cannot select a device using the audio player,
connect the device with the audio player.
"Phone Selection".
"Audio Selection".