Viewing The System Status - Toshiba 40E200U2 Owner's Manual

To set the Daylight Saving Time status:
1無
Press t or u to select Yes or No, highlight Done,
and then press .

Viewing the system status

To view the system status:
1無
Press and open the Setup menu.
2無
Highlight Installation and press
3無
A new set of Installation menu icons will appear.
Open the System Status menu, highlight System
Information, and press
4無
Press tu to scroll through the menu bar to select
the Factory Defaults or Support Information and
view the related information.
To close the screen and return to the
Installation menu:
Highlight DONE and press
To return to normal viewing:
Press .
Reset Factory Defaults
To reset all settings and channels to their
factory default values:
1無
Press and open the Setup menu.
2無
Highlight Installation and press
Installation menu icons will appear.
3無
Open the System Status menu, highlight System
Information, and press
4無
Press tu to scroll through the menu bar to select
Factory Defaults.
5無
Highlight Yes and press
6無
(If PIN code has been set, enter your PIN code. Press
t or u to select Done and press
message will appear, select Yes and press
will turn off automatically after a few seconds. After
the TV turns off, unplug the TV power cord and then
plug it in again to complete the reset process.
To cancel the reset:
Select No and press in step 5 above.
28
40E200U2_EN-2nd.indb 28
Chapter 5: Setting up your TV
.
.
.
. A new set of
.
.
.) A warning
, the TV
2010/3/31 上午 10:20:36