Unlocking Programs Temporarily; Using The Input Lock Feature; Using The Gametimer - Toshiba 26AV502RY Owner's Manual

5無
pq
Press to highlight the channel you want to
block and press , which puts an " " in the
box next to that channel.
6無
Repeat step 5 for other channels you want to
block.
7無
Highlight Done and press
To unblock individual channels:
pq
In step 5 above, press
you want to unblock, press
from the box, highlight Done and press
To block all channels at once:
Highlight Block All in step 5 on previous page and
then highlight Done and press
To unblock all locked channels at once:
Highlight Allow All in step 5 on previous page and
then highlight Done and press

Unlocking programs temporarily

If you try to tune the TV to a program that exceeds
the rating limits you set, the TV will enter program
lock mode and the following message will appear on-
screen:
This program exceeds the rating limit you set.
Push 'MUTE' to enter PIN.
You can either temporarily unlock the program or
select an unlocked program to watch.
To temporarily unlock the program:
1無
Press .
2無
Enter your four-digit PIN code and press
the correct code is entered, the program lock mode
is released and the normal picture appears. All
locking is disabled until the TV is turned off, and
will be enabled when the TV is turned on again.
48
Chapter 6: Using the TV's features
.
to highlight the channel
to remove the " "
.
.
.
. If

Using the input lock feature

You can use the Input Lock feature to lock the
video inputs (VIDEO 1, VIDEO 2, ColorStream HD-
1, ColorStream HD-2, HDMI 1, HDMI 2 and PC) and
channels 3 and 4. You will not be able to view the input
sources or channels until you unlock the inputs.
To lock/unlock the video inputs:
1無
From the Locks menu, Press
PIN code entering screen.
2無
Enter your four-digit PIN code and press
3無
q
to highlight Input Lock and press
Press
4無
p q
Press or to select the level of video input
locking you prefer, as described below.
Mode
Locks VIDEO 1, VIDEO 2,
Video ColorStream HD1/HD2, HDMI 1,
HDMI 2, and PC.
Locks VIDEO 1, VIDEO 2, ColorStream
HD1/HD2, HDMI 1, HDMI 2, PC and
Video+ channels 3 and 4.
Select Video+ if you play video tapes
•
via an ANT/CABLE input.
Unlocks all video inputs and channels 3
Off
and 4.
5無
Press .

Using the GameTimer

You can use the GameTimer to set a time limit for
playing a video game (30–120 minutes). When the
GameTimer expires, the TV enters Input Lock mode
and locks out the input source for the video game
device.
To set the GameTimer
1無
From the Locks menu, press
code entering screen.
2無
Enter your four-digit PIN code and press
3無
q
to highlight GameTimer and press
Press
4無
p q
Press or to select the length of time until
the Input Lock is activated (30, 60, 90, or 120
minutes) and press
To cancel the GameTimer
Select Off in step 4 above.
q
to display the
.
u
.
Description
®
®
:
q
to display the PIN
.
u
.
.
®
: