Installing The Water Line - Samsung RSG257AABP/XAA User Manual

setting up your side-by-side refrigerator

inStaLLinG thE watER LinE

Connecting the water line to the Refrigerator.
There are several items that you need to purchase to complete this connection. You
may find these items sold as a kit at your local hardware store.
• 1/4" compression nut
• copper tubing
1. Slip the compression nut
2. Tighten the compression nut
- If you are using copper tubing, slip the compression nut
on copper tubing (not included) as shown.
- If you are using plastic tubing
compression fitting.
Do not use without the molded end(Bulb) of the plastic tubing
CAUTION
3. Tighten the compression nut
4. Turn water on and check for any leakage.
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 1/4" of the plastic tubing to make sure
you get a snug, leak-free connection.
Installing the water filter.
Before installing the water filter, please remove the
top shelf.
1. Remove the water filter cover(
2. Remove the fixed cap by turning it counter
clockwise. Keep the cap in a safe place for later use
if you don't use a filter.
3. Remove the water filter from the box and put a
replacement indicator sticker on the filter as shown.
Place a sticker on the filter that dates six months
in the future. For example, if you install the water
filter in March, put the "SEP" sticker on the filter to
remind you to replace in September. That way you'll
know when it is time to replace the filter. Normally, a
filter life is about 6 months.
16_ setting up
• plastic tubing
• ferrule
Plastic tubing
through the supplied plastic tubing
onto the 1/4" compression fitting.
, insert the molded end(Bulb) of the plastic tubing
onto the compression fitting. Do not over-tighten the compression nut
)
1
Refrigerator
(Supplied)
Ferrule
(Not supplied)
Copper tubing or Plastic tubing
(Not supplied) (Not supplied)
household water line
.
(not included) and ferrule (not included)
.
2
Compression nut
(1/4") (Supplied)
Compression fitting
(Supplied)
Bulb
Compression nut
(1/4") (Not supplied)
into the
.
1
1
3
Sticker
(month indicator)