Network Connection - Wireless; Connecting To A Network - Samsung PN51E6500EF User Manual

You can set up your TV so that it can access SMART TV applications through your local area network
(LAN) using a wired or wireless connection.
After you have "physically" connected your TV to your network, you must configure the network
✎
connection to complete the process. You can configure the connection during the Initial Setup
process (see page 22) or after the Initial Setup process, through the TV's menu (see page 30).

Network Connection - Wireless

You can connect your TV to your local area network (LAN) through a standard wireless router or modem.
The LAN Port on the Wall
This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using
IEEE 802.11n. If you play video using IEEE 802.11a, b, or g, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the
network through an access point or AP (typically a wireless router or modem) to transmit an encrypted
security code called an access key.
Your TV is compatible with the following security protocols:
• Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK
• Encryption Type: WEP, TKIP, AES
If you select Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to WEP or
TKIP on your AP or wireless router, Samsung TVs will not support a connection in compliance with new
Wi-Fi certification specifications.
[PE6500-ZA]BN68-04195A-X0Eng.indb 14

Connecting to a Network

Wireless IP Router or
Modem that has a DHCP
Server
LAN Cable (Not Supplied)
English - 14
2012-02-11 3:01:39