Precautions To Avoid Possible Exposure To - Samsung MW76N-S Owner's Instructions & Cooking Manual

Appliances are not intended to be operated by means of an external
timer or separate remote-control system.
severe warning signs for cleaning
WARnInG
Do not clean the appliance by spraying water directly onto it.
Do not use benzene, thinner or alcohol to clean the appliance.
- This may result in discoloration, deformation, damage, electric shock
or fire.
Before cleaning or performing maintenance, unplug the appliance from
the wall socket and remove food waste from the door and cooking
compartment.
- Failure to do so may result in electric shock or fire.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean
the oven door glass since they can scratch the surface, which may
result in shattering of the glass.
Do not use your microwave oven to dry papers or clothes.
For your safety, do not use high-pressure water cleaners or steam jet
cleaners.
during cleaning conditions the surfaces may get hotter than usual and
children should be kept away. (cleaning model only)
excess spillage must be removed before cleaning and shall specify
which utensils can be left in the oven during cleaning. (cleaning model
only)
caution signs for cleaning
cAUtIon
The oven should be cleaned regularly and any food deposits removed.
Failure to maintain the oven in a clean condition could lead to
deterioration of the surface that could adversely affect the life of the
appliance and possibly result in a hazardous situation.
Take care not to hurt yourself when cleaning the appliance (external/
internal).
- You may hurt yourself on the sharp edges of the appliance.
Do not clean the appliance with a steam cleaner.
- This may result in corrosion.

PRecAUtIons to AVoID PossIBLe eXPosURe to

eXcessIVe MIcRoWAVe eneRGY
Failure to observe the following safety precautions may result in harmful
exposure to microwave energy.
(a) Under no circumstances should any attempt be made to operate the
oven with the door open or to tamper with the safety interlocks (door
latches) or to insert anything into the safety interlock holes.
(b) Do not place any object between the oven door and front face or allow
food or cleaner residues to accumulate on sealing surfaces. Ensure that
the door and door sealing surfaces are kept clean by wiping after use
first with a damp cloth and then with a soft dry cloth.
(c) Do not operate the oven if it is damaged until it has been repaired by a
qualified microwave service technician trained by the manufacturer. It is
particularly important that the oven door closes properly and that there
is no damage to the:
(1) Door (bent)
(2) Door hinges (broken or loose)
(3) door seals and sealing surfaces
(d) The oven should not be adjusted or repaired by anyone other than
a properly qualified microwave service technician trained by the
manufacturer.
This product is a Group 2 Class B ISM equipment. The definition of group
2 which contains all ISM equipment in which radio-frequency energy is
intentionally generated and/or used in the form of electromagnetic radiation
for the treatment of material, and EDM and arc welding equipment.
For Class B equipment is equipment suitable for use in domestic
establishments and in establishments directly connected to a low voltage
power supply network which supplies buildings used for domestic
purposes.
10