Samsung ME89F-1B Owner's Instructions Manual page 15

Table of Contents

Advertisement

Auto Sensor Cooking Instructions
The Auto Sensor allows you to cook your food automatically by detecting
the amount of gases generated from the food while cooking.
• When cooking food, many kinds of gases are generated. The Auto
Sensor determines the proper time and power level by detecting these
gases from the food, eliminating the need to set the cooking time and
power level.
• When you cover a container with its lid or plastic wrap during Sensor
Cooking, the Auto Sensor will detect the gases generated after the
container has been saturated with steam.
• Shortly before cooking ends, the remaining cooking time will begin its
count down. This will be a good time for you to rotate or stir the food for
even cooking if it is necessary.
• Before auto sensor cooking food may be seasoned with herbs, spices
or browning sauces. A word of caution though, salt or sugar may cause
burn spots on food so these ingredients should be added after cooking.
• The More/Less function pad is used to increase or decrease cooking
time. You should use this function to adjust the degree of cooking to suit
your personal taste. Utensils & Cover For Sensor Cooking.
• To obtain good cooking results with this function, follow the directions
for selecting appropriate containers and covers in the charts in this
book.
• Always use microwave-safe containers and cover them with their lids
or with plastic wrap. When using plastic wrap, turn back one corner to
allow steam to escape at the proper rate.
• Always cover with the lid intended for the utensil being used. If the
utensil does not have its own lid, use plastic wrap.
• Fill containers at least half full.
• Foods that require stirring or rotating should be stirred or turned toward
the end of the Sensor Cook cycle, after the time has started to count
down on the display.
MS89F_XEU-03818C_EN.indd 15
Utensils & Cover For Sensor Cooking
• To obtain good cooking results with this function, follow the directions
for selecting appropriate containers and covers in the charts in this
book.
• Always use microwave-safe containers and cover them with their lids
or with plastic wrap. When using plastic wrap, turn back one corner to
allow steam to escape at the proper rate.
• Always cover with the lid intended for the utensil being used. If the
utensil does not have its own lid, use plastic wrap.
• Fill containers at least half full.
• Foods that require stirring or rotating should be stirred or turned toward
the end of the Sensor Cook cycle, after the time has started to count
down on the display.
Important
• After installing the oven and plugging into an electrical outlet, do not
unplug the power cord. The gas sensor needs time to stabilize in order
to cook satisfactorily.
• It its not advisable to use the auto sensor cooking feature on a
continuous cooking operation, i.e. one cooking operation immediately
after another.
• Install the oven in a well ventilated location for proper cooling and airflow
and to ensure the sensor will operate accurately.
• To avoid poor results, do not use the Auto sensor when the room
ambient temperature is too high or too low.
• Do not use volatile detergent to clean your oven. Gas resulting from this
detergent may affect the sensor.
• Avoid placing the oven near high moisture or gas emitting appliances,
since this will interfere with the proper performance of the Auto Sensor.
• Always keep the inside of the oven clean. Wipe all spills with a damp
cloth.
This oven is designed for household use only.
15
2011-02-14
2:39:36

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents