¦ ¦
Installing¦the¦Stand
Preset
Front
Back
✎
Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to models
(Depending on the model)
Step¦1.¦ Connect the Guide Stand to the Stand using five screws (M4 X L12) as shown.
✎
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
✎
Make sure that at least two persons lift and move the PDP TV.
✎
Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to
one side.
Step¦2.¦Fasten two screws (M4 X L12) at position 1, and then fasten two screws (M4 X L12) at position 2.
✎
Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to
one side.
¦ ¦
Using¦the¦remote¦control¦buttons
ENTERE / DIRECTION Buttons
Move the cursor and select an
item. Select the currently selected
item. Confirm the setting.
RETURN
Button
Return to the previous menu.
¦ ¦
Installing¦Batteries¦in¦the¦Remote¦Control
Step¦1
TTX/MIX
CH LIST
MEDIA.P
2
3
A
B
S.MODE
SLEEP
P.MODE
P.SIZE
English - 2
SOURCE
GUIDE
MENU
Display the main on-screen menu.
EXIT
4
Exit the on-screen menu.
C
D
DUAL
E.SAVING
Step¦2
Button