Connecting To A Common Interface Slot - Samsung PS51D6900DK User Manual

Series 6+

Hide thumbs Also See for PS51D6900DK:

E-manual (297 pages)

Table Of Contents

Table of Contents

Attaching the CI Card Adapter

Attach the adapter as shown below.

To connect the CI CARD Adapter, follow these steps.

✎

We recommend attaching the adapter before installing

the wall mount, or inserting the "CI or CI+ CARD".

1. Insert the CI CARD Adapter into the two holes on the

product 1.

✎

Please find a two holes on the rear of the TV. A two

holes is beside the

2. Connect the CI CARD Adapter into the

INTERFACE

port on the product 2.

3. Insert the "CI or CI+ CARD".

We recommand that you insert the CI card before you mount the TV on a wall. It may be difficult to

insert after the mounting.

Insert the card after attaching the CI-Module on TV. It is difficult to attach the module if you insert

the card before attaching.

Using the "CI or CI+ CARD"

To watch paid channels, the "CI or CI+ CARD" must be inserted.

•

If you don't insert the "CI or CI+ CARD", some channels will display

the message "Scrambled Signal".

•

The pairing information containing a telephone number, the "CI or CI+

CARD" ID the Host ID and other information will be displayed in about

2~3 minutes. If an error message is displayed, please contact your

service provider.

•

When the configuration of channel information has finished, the

message "Updating Completed" is displayed, indicating the channel

list is updated.

✎

NOTE

You must obtain a "CI or CI+ CARD" from a local cable service provider.

When removing the "CI or CI+ CARD", carefully pull it out with your hands since dropping the "CI or CI+

CARD" may cause damage to it.

Insert the "CI or CI+ CARD" in the direction marked on the card.

The location of the

COMMON INTERFACE

"CI or CI+ CARD" is not supported in some countries and regions; check with your authorized dealer.

If you have any problems, please contact a service provider.

Insert the "CI or CI+ CARD" that supports the current antenna settings. The screen will be distorted or

will not be seen.