Water Condensation Drainage - Honeywell MM14 Series User Manual

WATER CONDENSATION DRAINAGE

WATER CONDENSATION DRAINAGE
When there is excess water condensation inside the unit, the air conditioner stops running and
shows a warning light. This warning light indicates that the water condensation needs to be drained
using the following procedures:
Manual Draining for AC & Dehumidifier Mode
Water may need to be drained in high humidity areas.
1. Unplug the unit from power source.
2. Place a shallow pan under the lower drain plug.
See diagram.
3. Remove the lower drain plug.
4. Water will drain out and collect in the shallow pan.
5. After the water is drained, replace the lower drain
plug firmly.
6. You can now turn on the unit.
Continuous Draining for Dehumidifier Mode
While using the unit in dehumidifier mode, continuous
drainage is recommended.
1.
Unplug the unit from the power source.
2. Remove the upper drain plug. While doing this
operation some residual water may spill so
please have a pan to collect the water.
3. Connect the drain connector to a ¾" hose (not
included). See diagram.
4. The water can be continuously drained through
the hose into a floor drain or sink.
You can now turn on the unit.
5.
8
Shallow Pan
(Not included)
EN
Lower
Drain Plug
Upper
Drain Plug
Water Drain Pipe