Video Setup - Yamakawa DVD-335 Operation Manual

VIDEO SETUP

Video Setup Page
System State System State Menu
Sharpness Low
Brightness 00
Contrast 00
Gamma None
Hue 00
Saturation 00
Luma Delay 1T
Press direction key ¡ ° ¡
± t o r e t u r n t o s e t u p m e n u
Sharpness:
Setup this item to control the sharpness of image, available range as high -medium -low.
Brightness:
Setup this item to control the brightness of image, available range from -20 to +20.
Contrast:
Setup this item to control the contrast of image, available range from -16 to +16.
Gamma:
Setup this item to adjust the image, available range as high -medium -low -none.
Hue:
Setup this item to control the hue of image, available range from -9 to +9.
Saturation:
Setup this item to control the saturation of image, available range from -9to +9.
Luma Delay:
Setup this item to control the luma delay of image, available range from 0T to 1T.
The VIDEO Setup lets you also select between different signals for the video outputs.Since
these outputs offer signals permanently there are no special settings required. The P/I-key
on the remote control will also guide you through these settings everytime you press it. The
TV MODE function in the SETUP lets you activate the PROGRESSIVE SCAN Signals for
the VGA, SCART and COMPONENT VIDEO output. Before you select the P-SCAN mode,
please check with the user manual of your display system, whether it does support P-SCAN
signals.
High
Medium
Low
Brightness |||||||||||||||
Contrast ||||||||||||||||
High
Medium
Low
None
Hue ||||||||||||||||
Saturation ||||||||||||||||
0T
1T
24
System Setup