Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Alpha Networks WMP-G09
Summary of Contents for Alpha Networks WMP-G09
- Page 1 User’s Manual WMP-G09...
-
Page 2: Fcc Statement
FCC Statement : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. - Page 3 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Modular Approval This device is intended only form OEM integrator under the following conditions: 1) The antenna must be installed such that 20cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna.
-
Page 4: Product Features
1.0 Scope 1.1 Document This document is to specify the product requirements for 802.11b/g Mini-PCI Card. This Mini-PCI Card is based on Atheros AR5005GS chipset that complied with IEEE 802.11b standard from 2.4~2.5GHz, and it can be used to provide up to 11Mbps for IEEE 802.11b and 54Mbps/108Mbps for 2.4GHz IEEE 802.11g to connect your wireless LAN. -
Page 5: Functional Block Diagram
2.0 Requirements The following sections identify the detailed requirements of the 802.11g Mini-PCI Card. 2.1 Functional Block Diagram Connectors Mini-PCI Atheros AR2414 802.11b/g MAC/BBP/Radio... -
Page 6: General Requirements
2.2 General Requirements 2.2.1 IEEE 802.11b Section Feature Detailed Description Ÿ 2.2.1.1 Standard IEEE 802.11b Ÿ 2.2.1.2 Radio and DQPSK, DBPSK, DSSS, and CCK Modulation Schemes Ÿ 2.2.1.3 Operating 2400 ~ 2497MHz ISM band Frequency Ÿ 2.2.1.4 Channel 11 channels for United States Numbers 13 channels for Europe Countries 14 channels for Japan... - Page 7 Feature Detailed Description Sensitivity PDUs) Error Rate = 10% Ÿ – 87dBm at 6Mbps Ÿ – 86dBm at 9Mbps Ÿ – 85dBm at 12Mbps Ÿ – 83dBm at 18Mbps Ÿ – 80dBm at 24Mbps Ÿ – 76dBm at 36Mbps Ÿ –...
-
Page 8: Software Requirements
2.3 Software Requirements The Configuration Software supports Microsoft Windows 98SE, ME, 2000, and XP. This configuration software includes the following functions: Ÿ Information Information allows you to monitor network status. Ÿ Configuration Configuration allows you to configure parameters for wireless networking. Ÿ... -
Page 9: Mechanical Requirements
Feature Detailed Description Ÿ Power Save 2.3.2.3 Extend the battery life of clients by allowing the client to sleep for short periods of time while the Access Point buffers the messages. Ÿ RTS Threshold 2.3.2.4 Set the number of bytes used for fragmentation boundary for messages Ÿ... -
Page 10: Environmental Requirements
Feature Detailed Description requirements Ÿ Physical Layer and 2.5.3 Meet ALPHA Engineering Test Plan and Test Functionality Report 2.6 Requirements of Reliability, Maintainability and Quality Feature Detailed Description Ÿ 2.6.1 MTBF Mean Time Between Failure > 30,000 hours Ÿ Maintainability 2.6.2 There is no scheduled preventive maintenance required... - Page 11 l Test Program Operation Guide: [Step1] Run program in Desktop at server (see Figure 1) to open test window (see Figure 2). (Figure 1) (Figure 2) [Step 2] (a) Select Golden Card Type as you need (WCBG09..A1), then click ”Golden Start” button (Figure (b) Figure 3 pops up.
- Page 12 [Step 3] Select ”DUT PC” (Figure 5) and press ”ENTER” button to show the test (Figure 6) (Figure 5) (Figure 6)
- Page 13 [Step 4] press “setting ”and then show form Figure 7,enter Password “abcdef” will show Figure 8, press “確 定 ” button. (Figure 7) (Figure 8) [Step 5] chose “setting->DUT setting”, will show Figure 9,and chose and set the test item and equipment. (Figure 9)
- Page 14 (Figure 10) [Step 6] Scan the serial number on PCBA. [Step 7] Start the test by clicking “DUT Auto Test” button (see Figure 11). (Figure 11) Remark: Item 2 & 3 are for the Target Power Test, items 5 are for SpecMask Test and item 6 is for TX and RX Link Test.
Need help?
Do you have a question about the WMP-G09 and is the answer not in the manual?
Questions and answers