Yamaha DSP-AX1 Owner's Manual page 62

Operating the Macro Feature
TRANSMIT RE-NAME CLEAR LEARN
SYSTEM
POWER STANDBY V-AUX
D-TV CBL/SAT TUNER
VCR 1 VCR 2 VCR 3
TITLE
Programming a Macro
You can use the Macro feature to transmit many remote control commands by pressing a single button.
MACRO
SYSTEM
POWER STANDBY V-AUX
D-TV CBL/SAT TUNER
VCR 1 VCR 2 VCR 3
SYSTEM
POWER STANDBY V-AUX TAPE PHONO
D-TV CBL/SAT TUNER MD CD
VCR 1 VCR 2 VCR 3 LD DVD
1
6CH INPUT
%
TITLE
ENTER
SOURCE
%
%
DISPLAY MENU SOUND
SELECT SEARCH – CHAPTER +
%
! ! $ $
2
POWER REC STOP PAUSE PLAY
* #
/
3
MACRO
Notes:
• "NG" appears in the display window when programming is not done correctly.
• "ERROR" appears in the display window in the following conditions: when pressing more than one button at once; and when MACRO ON/OFF is
switched to another position.
60
Remote Control Features
MACRO ON/OFF
MACRO
MACRO
OFF ON
TAPE PHONO
Macro buttons
MD CD
LD DVD
6CH INPUT
%
ENTER
TAPE PHONO
MD CD
flashes
alternately
LD DVD
6CH INPUT
indicates the number of
macrosteps you entered
flashes alternately
Set MACRO ON/OFF to ON.
1
1
2 Press a Macro button.
2
Notes:
• When you are finished using the Macro feature, set MACRO ON/
OFF to OFF.
• While the main unit is carrying out a macro program, the main unit
does not receive any other button's function until the macro is
complete (the TRANSMIT indicator stops flashing).
• Continue to aim the remote control at the equipment the macro is
operating until the macro program is complete.
Press MACRO using a ball point pen or similar object.
1 1
• If you do not initiate the procedure within 30 seconds, the
macro programming process is canceled.
2 Press the macro button on which you want to program the
2
Macro.
• If you want to change the source component, use SOURCE
%
%
SELECT / or the input buttons. When you use input
buttons, input is selected as a Macro step, whereas SOURCE
% %
SELECT /
only changes the component.
• The display window shows the button you chose for
programming the macro and the component name in
alternation.
Press the buttons of the functions that you want to include
3
3
in the macro sequence in order.
• You can set up to 10 Macro steps (10 functions).
(ex)
MCR 1 : DVD input
1
MCR 2 : DVD ›
2
MCR 3 : DVD #
3
4 4 Press MACRO again when the sequence you want to
program is complete.
• After you set 10 steps, "FULL" is displayed.