Specifications; General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference - Makita GA7050R Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Depressed center wheel diameter
Max. wheel thickness
No load speed (n
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Wear safety glasses.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance
Directive,
Electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
Model
Spindle thread
)/Rated speed (n)
0
Overall length
Net weight
Safety class
of the
on Waste Electric
Equipment
environmentally compatible
GA7050
180 mm
6.5 mm
M14
8,500(min
432 mm
4.5 kg
END202-8
For model GA7050, GA9050
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
impedance equal or less than 0.22 Ohms it can be
presumed that there will be no negative effects. The
mains socket used for this device must be protected with
a fuse or protective circuit breaker having slow tripping
characteristics.
European
General Power Tool Safety
and
and its
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
ENE048-1
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
ENF002-2
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2
GA7050R GA9050
180 mm 230 mm
6.5 mm
M14
-1 -1
) 8,500(min ) 6,600(min
455 mm 432 mm
4.6 kg
/II
GA9050R
230 mm
6.5 mm 6.5 mm
M14 M14
-1 -1
) 6,600(min )
455 mm
4.7 kg 4.8 kg
ENF100-1
GEA005-3