Contents Of Package; Safety Instructions; Delivery; Technical Specifications - Siemens SN678D10TG Instruction Manual

Table of Contents

Advertisement

en Installation and connection

Contents of package

If you have any complaints, contact the
dealer from whom you purchased the
appliance or our customer services.
Dishwasher
Instructions for use
Installation instructions
Quick reference guide *
Warranty *
Installation materials
Steam guard plate *
Steam protection film *
Rubber apron *
Power cord
* depending on the features of your
dishwasher

Safety instructions

Please follow the safety instructions
under ~ "Installation" on page 6.
50

Delivery

Your dishwasher has been checked
thoroughly in the factory to ensure that
it is in working order. This may cause
small water stains. These will disappear
after the first wash cycle.

Technical specifications

Weight:
up to 60 kg
Voltage:
220–240 V, 50 Hz or 60 Hz
Connected load:
2.0 - 2.4 kW.
Fuse:
10/16 A (UK 13 A).
Power input:
off mode (Po)* 0,50 W.
left on mode (Pl)* 50 W.
*according to regulations (EU) nos.
1016/2010 and 1059/2010.
Additional functions and settings
may increase the power input.
Water pressure:
at least 0.05 MPa (0.5 bar),
maximum 1 MPa (10 bar).
At a higher water pressure:
connect pressure-reducing valve
ahead.
Inlet rate:
minimum 10 litres/minute
Water temperature:
cold water.
Hot water:
Maximum temperature 60 °C.
Capacity:
12–15 place settings (depending on
the features of your dishwasher).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx seriesSn seriesSx778d00tg

Table of Contents