Intellisystem IT-ES7110-IM-2GS Series User Manual
  1. Manuals
  2. Brands
  3. Intellisystem Manuals
  4. Switch
  5. IT-ES7110-IM-2GS Series
  6. User manual

Intellisystem IT-ES7110-IM-2GS Series User Manual

Managed industrial ethernet switch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IT-ES7110-IM-2GS Series
Managed Industrial Ethernet Switch
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IT-ES7110-IM-2GS Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Intellisystem IT-ES7110-IM-2GS Series

Summary of Contents for Intellisystem IT-ES7110-IM-2GS Series

  • Page 1 IT-ES7110-IM-2GS Series Managed Industrial Ethernet Switch User Manual...

  • Page 2: Packing List

    【Summarize】 IT-ES7110-IM-2GS series is an industrial grade, managed and redundancy Ethernet switch. It included IT-ES7110-IM-2GS-P (12/48VDC), IT-ES7110-IM-2GS-P (110/220VAC), IT-ES7110-IM-2GS-2F-P (12/48VDC) and IT-ES7110-IM-2GS-4F-P (12/48VDC). IT-ES7110-IM-2GS series provided some kinds of advanced network managed function, like as: SW-Ring redundancy ring network, VLAN, Trunking, Quality of Service, Speed control, port mirroring, fault alarm and firmware upgrade online.

  • Page 3: Panel Layout

    【Panel layout】 Top view Below view Rear view IT-ES7110-IM-2GS-P (12/48VDC) 1. Ground screw 2. PWR1/PWR2 power input. 3. Relay output terminal block. 4. DIP switch5. CONSOLE port. 6. DIN-Rail mounts. 7. Wall mount screw hole. 8. Relay alarm LED. 9. The power LED. 10.
  • Page 4 IT-ES7110-IM-2GS-P（110/220VAC） 1. Ground screw. 2. Power input (L/-, FG, N/+). 3. Relay output terminal block. 4. DIP switch. 5. CONSOLE port. 6. DIN-Rail mounts. 7. Wall mount screw hole. 8. Relay alarm LED. 9. Systems running LED. 10. 100M Link/ACT LED. 11.

  • Page 5: Appearance And Dimensions

    IT-ES7110-IM-2GS-4F-P (12/48VDC) 1. Ground screw. 2. PWR1/PWR2 power input. 3. Relay output terminal block. 4. DIP switch. 5. CONSOLE port. 6. DIN-Rail mounts. 7. Wall mount screw hole. 8. Relay alarm LED. 9. The power LED 10. Systems running LED. 11.

  • Page 6: Power Supply Input

    Front view IT-ES7110-IM-2GS series top panel provided 4 bit power supply input terminal block, support AC or DC input. DC power supply input supported redundancy function, provided PWR1 and PWR2 power input, can use for single, and can connect 2 separately power supply system, use 1 pair terminal block connect the device at the same time.

  • Page 7: Relay Connection

    【Relay connection】 The relay owns two contacts of the terminal block on the top pane of IT-ES7110-IM-2GS series. It is used to detect both power failure and port failure. The two wires attached to contacts form an open circuit when: (1) IT-ES7110-IM-2GS series has lost power supply from one of the DC power inputs.
  • Page 8 MDI (straight-through cable) MDI-X (Cross over cable) MDI/MDI-X auto connection makes IT-ES7110-IM-2GS easy to use for customers without considering the type of network cable. 100Base-FX Fiber port 100Base-FX full-duplex SM or MM port, SC/ST/FC type. The fiber port must be used in pair, TX (transmit) port connect remote switch’s RX (receive) port;...

  • Page 9: Led Indicator

    1000SFP fiber port (mini-GBIC) 1000BaseSFP fiber port adopts gigabit mini-GBIC transmission, can choice different SFP module according to different transfer distance. Fiber interface must use for pair, TX port is transmit side, must connect to RX (receive side). The fiber interface support loss line indicator. Suppose: If you make your own cable, we suggest labeling the two sides of the same line with the same letter (A-to-A and B-to-B, shown as below, or A1-to-A2 and B1-to-B2).

  • Page 10: Installation

    6. Environment：working temperature -40～75℃ Relative humidity 5%～95% DIN-rail installation In order to apply for industrial environments conveniently, IT-ES7110-IM-2GS series adopts 35mm DIN-Rail installation, the installation steps are as follows: 1. Examine the DIN-Rail accessories 2. Examine DIN Rail is firm or not and the position is suitable or not.

  • Page 11: Specifications

    6. Cable should be straight in the groove, and cannot beyond the groove in case of holding back the inlet and outlet holes. Cables should be banded and fixed when they are out of the groove; 7. User cable should be separated from the power lines. Cables, power lines and grounding lines cannot be overlapped and mixed w hen they are in the same groove road.
  • Page 12 Transfer distance Twisted cable: 100M（ standard CAT5/CAT5e cable） Multi-mode: 1310nm, 2Km Single-mode: 1310nm, 20/40/60Km 1550nm, 60/80/100/120Km LED indicators Run indicator: Run Interface indicator: Link (1~8/G1~G2) DC Power supply indicator: P1, P2 Alarm indicator: Alarm Power supply Input voltage: 12～48VDC or 110～220VAC（47～63Hz） Input method: 4 bits 7.62mm terminal block Overload current protect: 4.0A (DC) or 5.0A (AC) Support DC dual power supply redundancy and alarm input...
  • Page 13 Industry Standards CE, FCC, RoHS, PAL, UL508 (Pending) EMI: FCC Part 15, CISPR (EN55022) class A EMS: EN61000-4-2 (ESD), Level 4 EN61000-4-3 (RS), Level 3 EN61000-4-4 (EFT), Level 4 EN61000-4-5 (Surge), Level 4（AC power supply） EN61000-4-6 (CS), Level 3 EN61000-4-8, Level 5 Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Shake: IEC 60068-2-6...

This manual is also suitable for:

It-es7110-im-2gs-pIt-es7110-im-2gs-2f-pIt-es7110-im-2gs-4f-p

Table of Contents