Using The Guide Function (Psr-230 Only) - Yamaha PortaTone PSR-220 Owner's Manual

Using the Guide Function (PSR-230 only)

The Guide function in the Song mode serves as an automatic music "tutor," showing you which notes to play on
the keyboard. It even waits for you to play each note, before going on to the next. This lets you learn to play the
Songs of the Song mode at your own pace, and makes practicing the Songs extremely natural (and fun!).
1
Select a Song.
Press the SONG button to enter the Song mode, then use the numeric keypad to select the desired Song.
2
Select the desired "guided" part.
The Guide function lets you choose which part of a Song is to be guided. For example, you can
select the right-hand melody part to be guided — in which case, the guide lamps will light to help
you play the right-hand melody part. Or, you could select the left-hand chord backing part.
With "MinusMod" selected in the Song menu, select the desired Minus One Part (guided part setting).
(See page 32.)
3
Press the GUIDE button.
The GUIDE icon appears in the display, indicating that the Guide function is on.
4
Start playback.
When you press the START/STOP button to begin playback, the Song introduction will automatically
play up to the first note(s) of the main section of the Song, and pause until you play the next note(s).
The notes to be played are indicated by the Guide lamps above each key (red for the white keys and
green for the black). As you play each correct note, Song playback will continue, pausing until you
play the correct notes each time.
5
If desired, turn on the Minus One function to mute the guided part.
Normally, the guided part also plays back along with your performance. You can mute this part,
however, and play the guided part yourself. To do this, press the MINUS ONE button. (The Minus
One icon appears in the display.)
Song playback stops automatically when the end is reached. To stop the Song manually, press the
START/STOP button.
30
NOTE
• The Minus One Part parameter in the Song menu can be directly selected (in Song mode only) by pressing and
holding the GUIDE button.
MAIN/AUTO FILL
GUIDE
GUIDE button
NOTE
• Turning off the Guide lamps
If you find the Guide lamps distracting or wish to play the part without them, use the Lamp parameter in the
REVERB/OTHERS Menu (page 19) to turn the Guide lamps off. (Keep in mind that this doesn't turn off the Guide
function, but only the lamps.)
GUIDE
GUIDE icon in display