Camera Control; Add (Pair) A Camera; View A Camera - Motorola MBP50PU User Manual

4.6

Camera Control

4.6.1

Add (pair) a camera

M
1. Press the button and the menu bar will pop up.
<
2. Press the LEFT button or
del/
the
+
3. Press the UP button or
O
button to confirm.
/
4. Camera
button to select the desired Camera, and press the
searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its camera
location (with a * against it) cannot be selected for a new registration.
5. Press and hold the PAIR button on the underside of the Baby Unit until the
Parent Unit finds the camera, beeps and PAIR OK appears on the screen.
The video from the camera will then appear.
NOTE
A camera can only be registered to one Parent Unit at any one time.
4.6.2

View a camera

M
1. Press the button and the menu bar will pop up.
<
2. Press the LEFT button or
del/
the
+
3. Press the UP button or
O
button to confirm.
/
4. Camera
button to select the desired camera, and press the
picture from that camera.
Note: Only camera locations with a * can selected.
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press the
/
options from
16
>
add/ view/
-
DOWN button to select
/ /
will pop up, press the
>
add/ view/
-
DOWN button to select
/ /
will pop up, press the
O
button repeatedly to select the available Camera
/ /
,
RIGHT button until
scan
menu will pop up.
+
RIGHT button until
scan
menu pops up.
+
scan
.
is highlighted, and
add
, and press the
-
UP button or DOWN
O
button to start
is highlighted and
view
, and press the
-
UP button or DOWN
O
button to view the
Parent Unit Menu Options