Manual Conventions; Warnings, Cautions And Notes - GasTech D-Guard2S Operator's Manual

Manual Conventions

2
D-Guard is designed to detect, depending upon which sensor type is fitted, flammable gases and vapours,
oxygen concentration or toxic gases. The detector is intended to signal one or more warnings before gas
concentrations reach dangerous or harmful levels.
In order to ensure that the detector's intended function will operate as designed, it is essential that the
information and instructions presented in this manual are read and understood prior to installing, using or
maintaining the equipment.
configuration, operation, calibration, and maintenance is essential before using D-Guard
To aid with the process of bringing attention to key points, graphical notices are used in this manual. These
notices are graded based upon the consequence of ignoring or incorrectly applying the information given.
Warning. Significant risk to health and safety with the possibility of serious injury or death.
Caution. Possibility of unsafe operation of D-Guard
Warranty of D-Guard
Note. Additional information is provided to assist with understanding of detector
operation, configuration, calibration or maintenance.

1. Warnings, Cautions and Notes

For safety reasons, D-Guard
trained personnel. Reading and understand this instruction manual completely is essential before installing,
operating or servicing this equipment. Failure to install or operate this instrument in accordance with
instructions contained in this manual may result in invalidation of the conditions of warranty and additionally
create hazardous operating conditions.
In particular, a thorough understanding of the information relating to
2
and connected equipment may be invalidated.
2
must be installed, operated and serviced only by competent and appropriately
7
D-Guard
2
.
2
and connected equipment.
2