Removing And Replacing The Oven Door - Frigidaire FGEW2765PF Use & Care Manual

CARE AND CLEANING

Removing and Replacing the Oven Door

CAUTION
The door is heavy. For safe, temporary storage, lay the
door flat with the inside of the door facing down.
To remove oven door:
1. Open oven door completely, horizontal with floor
(Figure 22).
2. Pull the door hinge locks on both left and right door
hinges down from the oven frame completely towards
the oven door (Figure
blade screwdriver may be required.
3. Firmly grasp both sides of oven door along the door
sides. Do not use the oven door handle
4. Close the door to approximately 10 degrees from the
door frame (Figure 24).
5. Lift the oven door hinge arms over the roller pins
located on each side of the oven frame
To replace oven door:
1. Firmly grasp both sides of oven door along the door
sides. Do not use the oven door handle
2. Holding the oven door at the same angle as the removal
position, seat the hook of the hinge arm over the roller
pins located on each side of the oven door frame
(Figure 24 and Figure
must be fully seated onto the roller pins.
3. Fully open the oven door, horizontal with floor
(Figure 22).
4. Push the door hinge locks up towards and into the oven
frame on both left and right oven door hinges to the
locked position (Figure
5. Close the oven door.
IMPORTANT
Special door care instructions - Most oven doors contain
glass that can break. Do not close the oven door until all
the oven racks are fully in place. Do not hit the glass with
pots, pans, or any other object. Scratching, hitting, jarring,
or stressing the glass may weaken its structure causing
an increased risk of breakage at a later time.
32
23). A tool such as a small flat-
(Figure
(Figure
(Figure
25). The hook of the hinge arms
23).
Figure 22: Door hinge location
24).
25).
Figure 23: Door hinge locks
24).
oven
door
Figure 24: Holding door for removal
roller
pin
hinge
arm
Figure 25: Replacement and location of hinge arm and
roller pin
Oven door
hinge
locations
about
10°
hinge