Uniden 2.4 Owner's Manual page 60

Symptom
Severe noise interference.
The Caller ID does not display.
Voice Message Indication does
not work.
You cannot register the handset
at the base.
The handset doesn't
communicate with the
other handsets.
An extra handset can't join
the conversation.
You cannot make an intercom
call with another handset.
If you still have a problem.
[ 5 8 ] T R O U B L E S H O O T I N G
• Keep the handset away from microwave ovens, computers, remote control toys,
wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights,
and electrical appliances.
• Move to another location or turn off the source of interference.
• The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID service is current.
• Contact your local telephone company to make sure that your telephone receives FSK or SDT
message signaling.
• Charge the battery pack for 15-20 hours.
• Remove the base ID (see "Replacing the Base Setting" on page 27) and register the handset
(see "Register the Handset to the Base" on page 50).
• Remove the base ID (see "Replacing the Base Setting" on page 27) and register the handset
(see "Register the Handset to the Base" on page 50).
• Make sure that you have registered all handsets.
• Make sure there are not 2 handsets already using the 3-way conference feature.
• Make sure that the receiving handset is not in use.
• Call our customer hotline at 1-800-297-1023.
Suggestion
w w w . u n i d e n . c o m