Find Handset; Flash And Call Waiting - Uniden 2.4 Owner's Manual

Find Handset

note
•If the battery pack is
completely drained,
the handset will not
beep when paging.

Flash and Call Waiting

•You must subscribe
through your local
telephone company
to receive Call
Waiting or Caller ID on
Call Waiting service.
[ 3 4 ] B A S I C S
To locate the handset, press find handset on the base when
the base is in standby mode. All registered handsets beeps for
60 seconds, and "
Pa g in g
cancel paging, press any key on the handset or find handset
on the base.
If you have Call Waiting service and a call waiting tone sounds
while you are on a call, press talk/flash to accept the waiting
call. There is a short pause, and then you will hear the new
caller. To return to the original caller, press talk/flash again.
" appears on the handset display. To
w w w . u n i d e n . c o m