Configuration Properties; Ncimaxspeed (Maximum Speed); Nciminspeed (Minimum Speed) - Toshiba TOSVERT VF-FS1 Series Function Manual

6.4. Configuration properties

6.4.1. nciMaxSpeed
Configuration property (nc50), Variable Speed Drive 6010_11 (Mandatory)
SNVT type: SNVT_lev_percent (81)
SCPT reference: SCPTmaxSetpoint (50)
It is used to define the maximum speed of the inverter output. The value is entered as a percent of
nominal speed. The value of the maximum speed must be validated against the value of the minimum
speed as follows:
- Valid range:
- Unit: 0.005%
- Default Value: 100.000%
N.B.: By editing this variable, this option unit changes the inverter parameter "ul", automatically.
When setting small value, it may be limited by the lower limit of the inverter parameter "ul"
Prohibited
6.4.2. nciMinSpeed
Configuration property, Variable Speed Drive 6010_11 (Mandatory)
SNVT type: SNVT_lev_percent (81)
SCPT reference: SCPTminSetpoint (53)
It is used to define the minimum speed of the inverter output. The value is entered as a percent of
nominal speed. The value of the minimum speed must be validated against the value of the maximum
speed as follows:
- Valid range:
- Unit: 0.005%
- Default Value: 0.000%
N.B.: By editing this variable, this option unit changes the inverter parameter "ll", automatically.
Prohibited
(
Maximum Speed
0.000 % ≤ minimum speed ≤ maximum speed ≤ 163.830 %
(Limited within the value of the inverter parameter "ul" limitation)
Do not set the value out of valid range.
Setting the value out of valid range may result in injuries by motor running with
unexpected speed.
(
Minimum Speed
0.000 % ≤ minimum speed ≤ maximum speed ≤ 163.830 %
(Limited within the value of the inverter parameter "ll" limitation)
Do not set the value out of valid range.
Setting the value out of valid range may result in injuries by motor running with
unexpected speed.
)
Danger
)
Danger
- 19 -
E6581373