Table of Contents
Advertisement
ID555_IFU_US_EN.book Page 21 Thursday, November 27, 2008 11:00 AM
*
• Press
4 times to display
"1-234-567-8900" again.
2
To dial the current displayed
*
number, press
key.
• The call is initiated.
Note
You need to subscribe to Caller Line
Identification service to be able to see
the caller's number or name in the
call log (see "Access Call log" on
chapter 6.9.1).
When saving the call list entry to
phonebook, the original incoming
number will be saved instead of the
current displayed number.
If the first 3 digits of the incoming
number corresponds to the local area
code set in your phone, they will be
filtered automatically when you press
r
v
the
or
key to dial. To
change the local area code, please
refer to see "Set area code" on
chapter 9.10.
5.1.5
Call from the phonebook
d
1
Press
in idle mode.
:
2
Scroll
to a phonebook entry.
r
v
3
Press
or
key.
• The call is initiated.
Tip
:
Instead of scrolling
to browse the
phonebook entries, you can press the
numeric key corresponding to the
first letter of the entry you wish to
2
locate. For example, pressing
will show the entries starting with A.
2
Pressing
again will show the
entries starting with B, etc...
Using your phone
5.2
Answer a call
r
When the phone rings, press
key.
• The call is established.
Note
Incoming call has priority over other
events. Whenever there is an
incoming call, other status in progress
such as phone setting, menu
navigation, etc will be aborted.
Danger
When the handset rings during an
incoming call, please do not hold the
handset too close to your ear, as the
volume of the ringing tone may
damage your hearing.
5.2.1
Handsfree answering
v
When the phone rings, press
• The handset loudspeaker is
activated.
Danger
Handsfree activation can suddenly
increase the volume in the earpiece
to a very high level. Make sure the
handset is not too close to your ear.
5.3
End a call
e
To end a conversation, press
key.
Tip
If
AUTO HANG-UP
mode is activated
(see "Activate/Deactivate Auto
Hang-up" on page 31), you can simply
place the handset back to its base
station to end the call. This feature is
activated by default.
Note
The call duration will be displayed on
the handset screen for about 5
seconds.
key.
21
Advertisement
Table of Contents
