Charge The Parent Unit - Motorola BLISS54 User Manual

2.2

Charge the Parent Unit

The Parent Unit comes witha built-in Li-ion battery (3.8V, 2000mAh).
• Plug the micro-USB plug of power adapter(DC5V/1000mA) into the
Parent unit, connect the other end to a suitable electrical outlet.
• Leave to charge for 16 hours.
TIP:
The first time you use the Parent unit, or if you haven't used it for a long time,
it'll take 16 hours to fully charge.
The battery life on a single charge lasts for approximately 4 hours. We
recommend you keep the cable plugged into the mains power socket if
you're going to use for longer than this or throughout the night.
When the battery gets very low, it'll take about 30 minutes to charge enough
for you to use it for a short time. To charge the Parent unit in the shortest
amount of time, turn it off while it's charging.
• After the Parent unit has charged for 16 hours you can switch it on.
•
Before you do, move the Parent unit at least 3 feet from the Baby unit.Any
closer and you might get audio feedback interference.
•
Press and hold the
Baby unit are automatically linked and ready to use.
Getting Started
button to turn the Parent unit on, the Parent unit and
0
11