Sharp PN-70HC1E Operation Manual page 33

nSettings ( )
Volume
Adjusts the volume.
Brightness
Set to Standard to fix the brightness. Set to Auto to have the brightness change automatically. Set to Energy Saving to fix the
brightness at the middle value. Set to Auto/Energy Saving to change Eye protection to Off.
Startup and Shutdown
Startup Source
You can set the input mode that will be in effect when the power is turned on. If you select Last Source, the monitor cannot
start in APPLICATION mode. To start up in APPLICATION mode, select Specified Source, and select APPLICATION in
Specified Source.
Specified Source
Set the input mode at startup when the Startup Source is set to Specified Source.
OPS boot
Only OPS Source ....... When the input mode changes to OPS, turn on the power of the device in the expansion slot.
Any Source................. When the monitor power is turned on, turn on the power of the device in the expansion slot.
Close .......................... Do not automatically turn on the power of the device in the expansion slot.
The BIOS settings of the connected OPS may cause the power of the OPS to turn on when the monitor power is turned on,
regardless of the boot settings of the OPS.
Power Save Mode
When Off is selected, Wake on LAN is enabled. Note, however, that more power will be consumed in standby mode.
When On is selected, Wake on LAN is disabled. Note, however, that the startup time from standby mode becomes longer.
Time Settings
Automatic date & time
When connected to a LAN, set to On to automatically set the time to the network provided time.
Set date
When Automatic date & time is set to Off, set the date manually.
Set time
When Automatic date & time is set to Off, set the time manually.
Select time zone
Specify your time zone. Daylight saving time will be set automatically.
Use 24-hour format
Switch between 24-hour time and 12-hour time.
Language Settings
Language
Set the display language for the menu screen.
Mute With Freeze
Set whether or not audio turns off during freeze.
Backlight Off
When set to On, the backlight turns off. Audio does not turn off. When you touch the screen, the backlight turns back on.
Operation Mode
Mode1........Off If No Operation is set to On, and Power Save Mode is set to On.
(These settings can not be changed.)
Mode2........Will perform standard operation. Off If No Operation is set to Off, and Power Save Mode is set to Off. These
settings can be changed.
Off If No Operation
Off If No Operation
Determines whether or not to set the monitor to go into standby mode when there is no operation by the remote control unit,
touch or RS-232C control.
Time
Set the time until standby mode is entered.
Menu Items
33
E