Download Print this page

Guarantee And Service - Philips HP8341/00 User Manual

Philips straightener hp8341/00 salonstraight ceramic

Advertisement

When the function is on, a special odor may be smelt and a
»
sizzling noise may be heard, which is normal and caused by the
ions that are generated.
5 Slide the closing lock ( ) downwards to unlock the appliance.
6 Comb your hair and take a section that is not wider than 5cm for
straightening.
7 Place it between the straightening plates ( ) and press the handles
firmly together.
8 Slide the straightener down the length of the hair in a single motion
(max. 5 seconds) from root to end, without stopping to prevent
overheating.
9 After 20 seconds, repeat step 7 to 8 until you achieve the desired
look.
10 To straighten the rest of your hair, repeat steps 6 to 9.
Note: The appliance has auto-shut off function. It switches off
automatically after 60 minutes.
After use:
1 Switch off the appliance and unplug it.
2 Place it on a heat-resistant surface until it cools down.
3 Clean the appliance and straightening plates by damp cloth.
4 Lock the straightening plates ( ).
5 Keep it in a safe and dry place, free of dust. You can also hang it with
the hanging loop ( ) or store it in the supplied pouch.
3

Guarantee and service

If you need information e.g. about replacement of an attachment or if
you have a problem, please visit the Philips website at www.philips.com
or contact the Philips Customer Care Centre in your country (you find
its phone number in the worldwide guarantee leaflet). If there is no
Consumer Care Centre in your country, go to your local Philips dealer.

Advertisement

loading