Sanitising (specific types only)
With the UV sanitiser you can clean your brush head after every use.
Discontinue use of the sanitiser if the UV light bulb remains on when
the door is open or if the blue window is broken or missing from
the sanitiser. UV light can be harmful to the human eye and skin. This
appliance should be kept out of reach of children at all times.
Unplug the sanitiser and call Consumer Care if the sanitiser gives off
smoke or a burning smell while it is operating.
After brushing, rinse the brush head and shake off excess water.
Do not place the travel cap on the brush head during sanitisation.
Place your finger in the door recess on top of the sanitiser and pull
open the door.
Place the brush head on one of the 2 pegs in the sanitiser.
Make sure the bristles of the brush head directly face the light bulb.
Note: Only clean Sonicare ProResults brush heads in the sanitiser.
Make sure the sanitiser is plugged into the wall socket.
Close the door and press the green power on/off button once to
select the UV clean cycle.
Note: You can only switch on the sanitiser if the door is properly closed.
Note: The sanitiser stops if you open the door during the sanitising cycle.
Note: The sanitiser cycle runs for 10 minutes and then automatically switches
The sanitiser is in operation when the blue light glows through the
When the sanitising cycle is complete, the sanitiser automatically
Do not clean the brush head, handle, travel charger, charger cover and
the UV sanitiser in the dishwasher.