Table of Contents
Advertisement
4 Seven principles to
achieve results
To achieve the best results with Philips RéAura,
apply sufficient laser to your skin during your
8-week programme. Remember to always follow
these seven principles:
Treat only one body area (e.g. the face) during
1
your first 8 weeks.
Use setting 2 or 3.
2
Treat twice a week for 8 weeks without
3
skipping treatments.
Apply one laser dose per zone per treatment.
4
Use the laser performance gel and the laser
5
aftercare complex.
get advice from the Philips skincare expert team.
6
Use the MyRéAura online treatment guide.
7
4.1 Treat only one body area
(e.g. the face) during your
first 8 weeks
For your own convenience, we advise you to
limit your first 8-week programme to the facial
area. This allows you to gain experience in
using RéAura. This will bring the duration of the
treatment sessions down before you include other
areas in your treatment session.
4.2 Use setting 2 or 3
The device has three intensity settings. The higher
the setting, the deeper the laser goes into the skin,
the better results will be. A higher setting also
comes with higher discomfort (heat sensation and
redness). Setting 1 is only intended for practising
and should only be used the very first time. Using
setting 1 will not deliver results. To achieve results
use setting 2 (medium treatment setting) and
preferably setting 3 (high treatment setting).
•
Setting 1
•
Setting 2
•
Setting 3
4.3 Treat twice a week for
8 weeks without skipping
treatments
Clinical studies show that you get the best
results if you use Philips RéAura twice a week
for 8 weeks. Stick to this regimen and don't skip
a treatment. You can use Philips RéAura at any
time you like, provided there are at least 48
hours between treatments and you do not treat
more often than twice a week. After the initial
8-week programme, you can continue treatment
as necessary to maintain results. You can also
take a break and start a new series of treatments
whenever it suits you.
15
Advertisement
Table of Contents
