Tip
•
If your car audio does not have remote output, connect the remote input
terminal (REM) to the accessory power supply.
3. Use your power amplifier
REMOTE
Adjust input level
SUBSONIC
You can adjust the input voltage from 0.3V to 6V.
ON OFF
1
Rotate INPUT LEVEL to adjust input voltage.
LEVEL CONTROL
Adjust bass boost
You can punch extra bass for 0 to 12dB.
1
Rotate BASS BOOST to punch for extra bass.
About the protector indicator
The amplifier has a built-in protection circuit to protect the transistors
and speakers when:
The unit is overheated. Or
•
A DC current is generated. Or
•
The battery voltage is over low or over high. Or
•
The speaker terminals are short circuited.
•
When the PROTECTOR indicator lights up in red,
the unit shuts down automatically. If this happens, please:
REMOTE
SUBSONIC
ON OFF
SUB
WOOFER
30Hz
320Hz
30Hz
REMOTE
LEVEL CONTROL
SUB
WOOFER
320Hz
SUBSONIC
ON OFF
W
30