Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With the speakers, you can enjoy high power music with vivid sound. What’s in the box Check and identify the contents of your package: Speakers (x2) Grille net + Frame (x2) Speaker wire (x2)
Page 4
Option 1: Mount on door (front or rear) You can mount the speakers on the front/rear door of your car. Note • Make sure that nothing obstructs around the mounting location of the door. • A hole for mounting may already be cut out of the inner panel of the door (front or rear).
Page 5
Remove the grille net. Strip the speaker wires and connect them to the amplifier. Black wire: connect to left speaker • Black (white lined): connect to right speaker • Right Amplifier Left Note • Match the “left”, “right”, “+” and “-” terminals correctly. Revised polarity may degrade sound quality. •...
Page 6
Mount on the speaker as shown below. Press and insert the edges of the grille net. • The speaker grille can be mounted without the grille net, if you like. Option 2: Mount on rear tray You can also mount the speakers into the surface of the rear tray. Follow the steps in section “Option 1: Mount in door”...
Magnet mass (Oz) 5. Troubleshooting To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, go to the Philips web site (www.philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.